KLINGER^® Quantum

Unique gasket material with highest flexibility at high temperatures

KLINGER^® Quantum is a unique gasket material with highest flexibility at high temperatures.

Basis

High-quality fibre and filler compound bonded in a high temperature resistant HNBR-Matrix.

Areas of application

This material is suitable for the use in oils, water, steam, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants and refrigerants.

KLINGERSIL® C-4300 ist eine universelle Hochdruckdichtung.

Key features

Unique HNBR matrix
Special curing technology
Resistant to creep and cold flow
Dimensionally stable

Benefits

Superior long-term flexibility at higher temperatures
Outstanding temperature resistance
FDA conformity

Typical technical data for thickness 2.0 mm

Compressibility ASTM F 36 J		%	10
Recovery ASTM F 36 J		%	50
Stress relaxation DIN 52913	50 MPa, 16 h / 175 °C 50 MPa, 16 h / 300 °C	MPa MPa	32 30
Stress relaxation BS 7531	40 MPa, 16 h / 300 °C	MPa	29
KLINGER cold/hot compression 50 MPa	thickness decrease at 23 °C thickness decrease at 300 °C thickness decrease at 400 °C	% % %	10 14 20
Tightness	DIN 28090-2	mg/s x m	0.02
Specific leakrate λ	VDI 2440	mbar x I/s x m	4.4E-08
Thickness increase after fluid immersion ASTM F 146	Oil IRM 903: 5 h / 150 °C Fuel B: 5 h / 23 °C	% %	3 5
Density		g/cm³	1.7
Average surface resistance	ρO	Ω	7.7x10E12
Average specific volume resistance	ρD	Ω cm	4.7x10E12
Average dielectric strength	E_d	kV/mm	18.5
Average power factor	50 Hz	tan^δ	0.064
Average dielectric coefficient	50 Hz	εr	6.8
Thermal conductivity	λ	W/mK	0.44
Classification acc. to BS 7531:2006	Grade AX

ASME-Code sealing factors

for gasket thickness 1.0 mm	tightness class 0.1 mg / s x m	MPa	y 15 m 1.1
for gasket thickness 2.0 mm	tightness class 0.1 mg / s x m	MPa	y 15 m 2.5
for gasket thickness 3.0 mm	tightness class 0.1 mg / s x m	MPa	y 15 m 3.8

Dimensions of the standard sheets

Sizes	1000 x 1500 mm, 2000 x 1500 mm
Thicknesses	0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
Tolerances	Thickness acc. to DIN 28091-1 Length ±50 mm, Width ±50 mm

Other thicknesses, sizes and tolerances on request.

Function and durability

The performance and service life of KLINGER gaskets depend to a large extent on proper storage and fitting - factors beyond the manufactor’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also take note of our Installation manual.